Honda Shadow Forums : Shadow Motorcycle Forum - View Single Post

Motorchef · 10-23-2011, 06:50 AM

I have the smallest Vise Grip made. They work perfect for this issue. I always start loosening these screws with an impact driver. This tool has a spring in it and always you to preload downward against the fastener. It is made to be stuck with a hammer as you push down and twist. You may also just push down and twist. You can by one at Sears. They all have a half inch square drive which alawys sockets to be used with it or the adapter that is included with the screw bits. http://www.sears.com/shc/s/p_10153_1...ABTestAvl=true

10-23-2011, 06:50 AM	#7 (permalink)
Motorchef Member Join Date: Jun 2011 Location: New Jersey near the Delaware Water Gap Posts: 55	I have the smallest Vise Grip made. They work perfect for this issue. I always start loosening these screws with an impact driver. This tool has a spring in it and always you to preload downward against the fastener. It is made to be stuck with a hammer as you push down and twist. You may also just push down and twist. You can by one at Sears. They all have a half inch square drive which alawys sockets to be used with it or the adapter that is included with the screw bits. http://www.sears.com/shc/s/p_10153_1...ABTestAvl=true __________________ [/IMG] Last edited by Motorchef; 10-23-2011 at 06:52 AM.