clutch pushrod seal - Honda Shadow Forums : Shadow Motorcycle Forum

gordo2472003 · 04-11-2012, 01:32 PM

cant seem to find this darn part. John Hopkins said it comes part of the slave cylinder repair kit but I cant find anybody that Carries it for my bike. Any suggestions? Ebay doesnt have it and neither does bikebandit

John Hopkins · 04-11-2012, 03:56 PM

Here you go..

CLUTCH SLAVE CYLINDER REBUILD KIT for HONDA CB550 CB650 CB700 VF700 VT700 VF750 VT750 PC800 VT800 VF1100 VT1100

about $15..

John.

gordo2472003 · 04-11-2012, 04:45 PM

Thanks John. Question though. It pictures everything excect for what I need. Are we talking about the same thing or is it just not pictured.the seal I need is connected to the engine.not the slave cylinder itself.

John Hopkins · 04-11-2012, 05:10 PM

That round disk is the pushrod seal..

bottom left..

And yes it fits in the engine not the slave cylinder..

John.

gordo2472003 · 04-14-2012, 03:37 PM

Quote:

Originally Posted by John Hopkins

That round disk is the pushrod seal..

bottom left..

And yes it fits in the engine not the slave cylinder..

John.

Negative.ordered this and it didn't come with what I needed. It came with the small seal that fits into the slave cylinder.no pushrods seal.

John Hopkins · 04-14-2012, 07:27 PM

Quote:

Originally Posted by gordo2472003

Negative.ordered this and it didn't come with what I needed. It came with the small seal that fits into the slave cylinder.no pushrods seal.

sorry mate, that looked like the seal..I get my kits in Wales from JT's motorcycles at Bridgend and they come with the seal and the piston..

CLUTCH SLAVE CYLINDER REPAIR KI - Cycle Brakes
Kit includes push lever seals, clutch pushrod oil seal, spring and bleeder bolt cap
. Made in Japan. HONOA. 32-0129 Clutch Slave Cylinder Repair Kit CCK-lOl ...
www.cyclebrakes.com/K&LSlave.pdf - Cached - Similar

John.

gordo2472003 · 04-15-2012, 09:41 AM

No problem boss.appreciate all the help from anyway

MikeB · 04-15-2012, 10:32 AM

If you have the seal out take it to any auto parts store like NAPA. Or if it's still on the bike you might be able to see a part number on it. Seals are usually standard sizes, and Mama Honda is not likely to use an odd-sized part that would be difficult to source.

two "85" · 04-15-2012, 02:08 PM

Try the Honda dealer part #9109-MB0-003 Oil seal 8x18x5. That what is used on my 85 700, priced at 2.97 each.

04-11-2012, 01:32 PM	#1 (permalink)
gordo2472003 Senior Member Join Date: Feb 2012 Location: marysville,Ca Posts: 362	clutch pushrod seal cant seem to find this darn part. John Hopkins said it comes part of the slave cylinder repair kit but I cant find anybody that Carries it for my bike. Any suggestions? Ebay doesnt have it and neither does bikebandit __________________ "Layde" , my 86 VT700

04-11-2012, 03:56 PM	#2 (permalink)
John Hopkins Senior Member Join Date: Sep 2011 Location: Tredegar,South Wales, near England, not far from Scotland. Posts: 3,407	Here you go.. CLUTCH SLAVE CYLINDER REBUILD KIT for HONDA CB550 CB650 CB700 VF700 VT700 VF750 VT750 PC800 VT800 VF1100 VT1100 about $15.. John. __________________ Beauty is only skin deep but ugly goes right to the bone.

04-11-2012, 04:45 PM	#3 (permalink)
gordo2472003 Senior Member Join Date: Feb 2012 Location: marysville,Ca Posts: 362	Thanks John. Question though. It pictures everything excect for what I need. Are we talking about the same thing or is it just not pictured.the seal I need is connected to the engine.not the slave cylinder itself. __________________ "Layde" , my 86 VT700

04-11-2012, 05:10 PM	#4 (permalink)
John Hopkins Senior Member Join Date: Sep 2011 Location: Tredegar,South Wales, near England, not far from Scotland. Posts: 3,407	That round disk is the pushrod seal.. bottom left.. And yes it fits in the engine not the slave cylinder.. John. __________________ Beauty is only skin deep but ugly goes right to the bone. Last edited by John Hopkins; 04-11-2012 at 05:21 PM.

04-15-2012, 09:41 AM	#7 (permalink)
gordo2472003 Senior Member Join Date: Feb 2012 Location: marysville,Ca Posts: 362	No problem boss.appreciate all the help from anyway __________________ "Layde" , my 86 VT700

04-15-2012, 10:32 AM	#8 (permalink)
MikeB Senior Member Join Date: Jan 2004 Location: Placerville, CA Posts: 4,863	If you have the seal out take it to any auto parts store like NAPA. Or if it's still on the bike you might be able to see a part number on it. Seals are usually standard sizes, and Mama Honda is not likely to use an odd-sized part that would be difficult to source.

04-15-2012, 02:08 PM	#9 (permalink)
two "85" Member Join Date: Jul 2010 Location: Wayland MI Posts: 80	Try the Honda dealer part #9109-MB0-003 Oil seal 8x18x5. That what is used on my 85 700, priced at 2.97 each. __________________ Sence joining this forum I have raised my standers now..... up yours! VT700C shadow XV700C virago Last edited by two "85"; 04-15-2012 at 02:10 PM.

Remove Advertisements Sponsored Links
HondaShadow.net Advertisement