This is really annoying - Honda Shadow Forums : Shadow Motorcycle Forum

John Hopkins · 11-07-2012, 06:00 PM

I am in the process of changing the clutch plates on my 1992 VT1100..and I am stuck at the locknut part number 90231mm8000 because it requires a special tool to remove it which is part number 07916-4220000 which I can buy for just under £50...but that is not the annoying bit..The locknut has been superseded by part number 90231ms2610 which requires a different tool to put it back on..

John.

msvilans · 11-08-2012, 12:13 AM

I hate it when that happens.

KennyG · 11-08-2012, 12:16 AM

Try a search on the fourum, and other forum sites for a homemade tool that is made by grinding a cheap socket to fit.

tattooed_pariah · 11-09-2012, 12:08 PM

are you talking about this locknut thing?

(also this was my solution.. couldn't get an accurate torque reading, but I got mine back on pretty tight...)

John Hopkins · 11-09-2012, 02:04 PM

thanks T P. yes thats the one but I have just had a closer look and I think it may have a spring clip holding it closed which is stopping me from undoing it.....

either my bad eyesight or I have to cut down on the stupid pills..

John.

GrumpyOldMan · 11-09-2012, 02:17 PM

Quote:

Originally Posted by tattooed_pariah

are you talking about this locknut thing?

(also this was my solution.. couldn't get an accurate torque reading, but I got mine back on pretty tight...)

Great job of "McGuyvering"!

11-07-2012, 06:00 PM	#1 (permalink)
John Hopkins Senior Member Join Date: Sep 2011 Location: Tredegar,South Wales, near England, not far from Scotland. Posts: 3,475	This is really annoying I am in the process of changing the clutch plates on my 1992 VT1100..and I am stuck at the locknut part number 90231mm8000 because it requires a special tool to remove it which is part number 07916-4220000 which I can buy for just under £50...but that is not the annoying bit..The locknut has been superseded by part number 90231ms2610 which requires a different tool to put it back on.. John. __________________ Beauty is only skin deep but ugly goes right to the bone.

11-08-2012, 12:13 AM	#2 (permalink)
msvilans Junior Member Join Date: Jun 2012 Location: Sudbury area, Ontario Posts: 29	I hate it when that happens. Last edited by msvilans; 11-08-2012 at 12:56 AM. Reason: drunk browsing...

11-08-2012, 12:16 AM	#3 (permalink)
KennyG Member Join Date: Sep 2012 Posts: 34	Try a search on the fourum, and other forum sites for a homemade tool that is made by grinding a cheap socket to fit. __________________ tis' himself Kenny G http://s1320.beta.photobucket.com/us...23290471409745

11-09-2012, 12:08 PM	#4 (permalink)
tattooed_pariah Member Join Date: Sep 2011 Location: Riverside, California Posts: 31	are you talking about this locknut thing? (also this was my solution.. couldn't get an accurate torque reading, but I got mine back on pretty tight...) __________________ -pariah "I never trust a fighting man who doesn't smoke or drink or at least cause a little trouble." -Admiral William Frederick Halsey Jr. 1972 VolksRod "Effigy" slowly getting back on the road Build Thread 2009 Dodge Challenger R/T "Folsom Blue" 1986 Honda Shadow VT1100 (as of yet unnamed) Work Thread

11-09-2012, 02:04 PM	#5 (permalink)
John Hopkins Senior Member Join Date: Sep 2011 Location: Tredegar,South Wales, near England, not far from Scotland. Posts: 3,475	thanks T P. yes thats the one but I have just had a closer look and I think it may have a spring clip holding it closed which is stopping me from undoing it..... either my bad eyesight or I have to cut down on the stupid pills.. John. __________________ Beauty is only skin deep but ugly goes right to the bone.

Remove Advertisements Sponsored Links
HondaShadow.net Advertisement