spotlights wiring - Honda Shadow Forums : Shadow Motorcycle Forum

robco · 12-06-2012, 03:23 PM

Hi I bought 2328 kuryakyn wiring harness. Please help mi with connection of the cables. I understand that black wires go to ground minus terminal and white cable to positive terminal on the battery. Red cable form the switch goes to some 12V cable or direct to positive terminal. There are two cables to each spotlight. White is power and black is ground. How should I connect the black one? Instuctions say to connect them to ground chasiss ot bare metal. I am a little confused how to connect the black ground cable. There are two cables from the bulb. White is power, one is ground. So, should I connect the ground form bulb with black from switch and than to chasis or how? If someone could send some picture or a simple scheme how to conect the cables, it would be great. Thank you.

Tom Szymborski Sr. · 12-06-2012, 03:37 PM

Hi Robco if you go to Kuryakyn website it has install instructions for that harness

Dauntae · 12-07-2012, 04:27 AM

I have the same harness to install so I looked up a vid for you and I bookmarked it for me

It's showing the installation of a different light bar but uses the same harness and goes into detail on how to connect it.

Dauntae
http://youtu.be/P17O9wBgKcQ

Dauntae · 12-07-2012, 04:30 AM

trying to get the vid here LOL can't get it to work but here is the link any who.

http://www.youtube.com/watch?feature...&v=P17O9wBgKcQ

Kitulu · 12-07-2012, 04:03 PM

I used the same harness. I attached the two ground wires to the bolts that hold the lightbar to the mounting plate.

Sent from my DROID RAZR using Motorcycle.com Free App

robco · 12-09-2012, 04:24 AM

Ok, but what about the lower end of these two cables ended with ring terminal? this end should be connected to minus terminal of the battery?

Tom Szymborski Sr. · 12-09-2012, 09:05 AM

yes

12-06-2012, 03:23 PM	#1 (permalink)
robco Junior Member Join Date: Jul 2012 Posts: 7	spotlights wiring Hi I bought 2328 kuryakyn wiring harness. Please help mi with connection of the cables. I understand that black wires go to ground minus terminal and white cable to positive terminal on the battery. Red cable form the switch goes to some 12V cable or direct to positive terminal. There are two cables to each spotlight. White is power and black is ground. How should I connect the black one? Instuctions say to connect them to ground chasiss ot bare metal. I am a little confused how to connect the black ground cable. There are two cables from the bulb. White is power, one is ground. So, should I connect the ground form bulb with black from switch and than to chasis or how? If someone could send some picture or a simple scheme how to conect the cables, it would be great. Thank you.

12-07-2012, 04:27 AM	#3 (permalink)
Dauntae Senior Member Join Date: Aug 2010 Location: Mass. Posts: 1,699	I have the same harness to install so I looked up a vid for you and I bookmarked it for me It's showing the installation of a different light bar but uses the same harness and goes into detail on how to connect it. Dauntae http://youtu.be/P17O9wBgKcQ __________________ 2001 Shadow Spirit 1100 Cobra highway bars Kury ISO grips w custom weighted bar ends and a VTX headlight but the best addition, Riding bell from Kathy M and Kury Large ISO pegs I laugh in the face of danger, then I hide until it goes away The book of John Hopkins map http://www.travellerspoint.com/membe.../tripid/365293

12-07-2012, 04:30 AM	#4 (permalink)
Dauntae Senior Member Join Date: Aug 2010 Location: Mass. Posts: 1,699	trying to get the vid here LOL can't get it to work but here is the link any who. http://www.youtube.com/watch?feature...&v=P17O9wBgKcQ __________________ 2001 Shadow Spirit 1100 Cobra highway bars Kury ISO grips w custom weighted bar ends and a VTX headlight but the best addition, Riding bell from Kathy M and Kury Large ISO pegs I laugh in the face of danger, then I hide until it goes away The book of John Hopkins map http://www.travellerspoint.com/membe.../tripid/365293 Last edited by Dauntae; 12-07-2012 at 04:54 AM.

12-09-2012, 04:24 AM	#6 (permalink)
robco Junior Member Join Date: Jul 2012 Posts: 7	Ok, but what about the lower end of these two cables ended with ring terminal? this end should be connected to minus terminal of the battery? Attached Thumbnails Last edited by robco; 12-09-2012 at 04:44 AM.

12-07-2012, 04:03 PM	#5 (permalink)
Kitulu Senior Member Join Date: Sep 2010 Location: Tennessee Posts: 576	I used the same harness. I attached the two ground wires to the bolts that hold the lightbar to the mounting plate. Sent from my DROID RAZR using Motorcycle.com Free App

Remove Advertisements Sponsored Links
HondaShadow.net Advertisement