|
|||||||
| Register | Home | Forum | Active Topics | Gallery | Garage | Search | Today's Posts | Mark Forums Read | Motorcycle Escrow | Insurance |
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) |
|
Junior Member
Join Date: Jun 2008
Posts: 11
|
Well I made a bit of a mistake. on my 2007 spirit 1100 I was troubleshooting a blinker issue, (wires got pinched when installing a cargo rack) and i decided to drop the rear fenderoff the rails to hav more room to properly route the blinker wire. Well when i was putting the fender back on the tali light wires came off of the battery end and i can't for the life of me figure out where they go. There is not a molex connector on the end of the wires like I would normally see but just 4 seperate wires with male bullet plugs on them. can anyone help me to figure this one out? I have looked at the online haynes manual for the 98 model but there is no picture of the wiring assembly.....
|
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#2 (permalink) |
|
Senior Member
Join Date: Apr 2008
Location: Norway (Europe, Scandinavia)
Posts: 247
|
try this: http://www.bikebandit.com/houseofmot...t-2007/o/m9633
Might find something by checking the wire harness photos agains the tail light.
__________________
1985 VT700C, ready for duty. |
|
|
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
|
|