Fill it up the front brake master cylinder completely open the nipple at the bottom and use a straw to suck it threw. (Caution don't get any in your mouth) After you have it in the line refill the Cylinder. Begin to bleed each section of the line. Start at the first connection on the Master Cylinder then continue to the next one on the brake caliber. Then the nipple, pump the brake each time in between bleeds to push the air. Pretty simple just do not get any in your mouth or on your paint. Be sure to put a towel over your tank and fender! Good luck ride safe! P.S. if you get any on your paint run for the hose wash it off and you should be ok. Just donít let it sit or it will eat away at it.
1997 VT1100C HondaShadowSpirit(Daily Driver)
1978 Honda xl125(Ranch Rider)