Honda Shadow Forums : Shadow Motorcycle Forum - View Profile: PainterD

PainterD PainterD is offline

Senior Member

  Visitor Messages

Showing Visitor Messages 1 to 8 of 8
  1. shado#9
    06-18-2013 03:00 AM - permalink
    painter ...I no longer have access to my riding buds (divorce stuff)
    looking for some riding partners ...I might suggest a quick run for fun ...
    PM me if you are riding sometime ? me vt1100c many years mpls area
    thanks... would be much appreciated...
  2. gypsy
    02-14-2013 07:41 PM - permalink
    I think you are on cruiser customizing under the same handle. If so it says you purchased highway bars for your 96 vt1100c. Is this correct? I ask because I know there is a slight difference on the gearshift step between the early 87-96 models and the 97 and up. Cc states that the highway bars are for fit men on 97 and newer 1100's. however years Angola I had, I think, the same bars on my 96 with no problems mounting them. Your input will be greatly appreciated.
  3. Dcocch
    03-25-2012 12:58 PM - permalink
    Dcocch I just looked at your profile and realized you're shipping that amp from Central MN. I grew up in Woodbury, MN just east of St. Paul. I miss the MN summers...but the Army keeps sending me south. I'm sure I'm going to like the Georgia winters more than those MN winters!
  4. gunny
    02-28-2012 11:51 AM - permalink
    Not sure about this spring but yes, a possibility. I will be heading for Sleeping Giant this summer via Ely & Grand Marais. Where is central mn?
  5. mcpenner
    05-27-2011 06:38 PM - permalink
    Thanks for your reply to me pre trip thread. I was just wondering what fairing that is on your bike? I was looking at getting a Memphis shades bat-wing but the local parts guy doesn't think it will fit.
  6. ohiospirit1100
    05-02-2011 09:02 PM - permalink
    Hey Painter do do you have a wire diagram for your year vt1100 , Ineed to replace the cdi on my 87 and they nolonger make it . so i am going to use the one for 89 to 96 vt1100c but want to be sure it will work before i drop 300 bucks on a new one. thanks for you reply!
  7. jpres3
    03-27-2011 06:39 PM - permalink
    You seem to be pretty knowledgable about the audio systems. I currently have a Shark 100W and am pleased with the volume it produces. However, I would like to have some bass because some of the sound comes out tinny. I went to ebay and found a motorcycle amp that does have a bass feature but the speaker connections are bare wire and my speaks have RCA jacks. Can they be modified?
    Thanks for any input.
  8. zappa
    02-26-2011 11:40 AM - permalink
    Hey Painter..So what all have you done to your Ride.? I just got my 96 1100 and want to do a few things to it. Like relocate the frt turn signals, add pullback drags, drill out the baffles. Do you know if the stock risers are high enough for the clearance of the tank or will I need to get higher risers? And they sell the turn signal mounts for like $60 but I saw Harley ones for like $25. Do you know if those are the same?

  About Me

  • About PainterD
    Central, Minnesota
    Bikes, custom painting, custom fabrication
    Truck Driver
  • Signature


Total Posts
Visitor Messages
General Information
  • Last Activity: 07-12-2015 08:45 AM
  • Join Date: 01-14-2004
  • Referrals: 0


Showing Friends 1 to 1 of 1
  • gunny
    • gunny is offline


No results to display...


04:01 PM - GiveItToMikey quoted PainterD in post Merging FAIL: How NOT To Merge Into Traffic
First, he crossed over the so...
09:08 AM - Phil quoted PainterD in post Merging FAIL: How NOT To Merge Into Traffic
he's under qualified to ride ...
For the best viewing experience please update your browser to Google Chrome