Honda Shadow Forums : Shadow Motorcycle Forum - View Profile: Aced It

Aced It Aced It is online now

Senior Member

  Visitor Messages

Showing Visitor Messages 1 to 10 of 19
  1. Aced It
    02-03-2015 01:23 PM - permalink
    Aced It
    archaicFEVER, I have a Lincoln Power Mig 140C MIG Welder - K2471-2.
  2. archaicFEVER
    02-02-2015 01:59 PM - permalink
    What kind of welder did you purchase just wondering?
  3. Aced It
    08-14-2013 11:53 AM - permalink
    Aced It
    Fakirone, the helmet is an XL. I would gladly sell it as it's like new (I don't wear it anymore). Let me know ... PM me.
  4. fakirone
    08-13-2013 08:10 PM - permalink
    Hi, I know that this is random and you don't know me from Adam, but I was wondering if you could help me out. I was searching online and came across your posts regarding the Outlaw helmet and that you are not using yours. I have an Outlaw that is too big for me, but is the ONLY helmet that I have ever found to fit my head shape. I currently wear a bandana under mine to keep it snug.
    So, questions are, A. What size is your Outlaw, and B. Any chance you would sell it to me?
    You may think that I am crazy, but I am on a mission to get another one and I thought maybe you might help me out.

    Thank you for your time.
  5. Aced It
    08-09-2013 08:31 AM - permalink
    Aced It
    Birshking, the white walls are not "rattle can". They are rolled on using the Elastomeric roofing paint, just to be clear. But yes, they are holding up with no issues other than graying a bit in color, on the newer Bridgestones. On the Dunlops, it was more of a yellowing. No worries; creates a nice worn in look. Preparation is everything.
  6. birshking
    08-06-2013 08:18 PM - permalink
    hows the rattle can white wall doing? im thinking of trying this myself as i dont want to buy new tries as these are still good
  7. BlackFlames
    07-30-2013 07:16 PM - permalink
    did you ever find out what seat was on that bike? You kept asking about it, and I didnt find an answer in the threads.
  8. xkpchrist
    06-03-2013 03:42 PM - permalink
    hi i need some help on my bike and i wanted to post a thread but cant since im a new member i think. but if you could help me id greatly appreciate it.

    a brief description of my problem:
    i noticed that my bike was not running right. ran a compression test on the #1 cyclinder and noticed i was running at like 90 psi. took the engine out and changed the head gasket and piston ring. poured new oil and it brought my compression back to 120 on just the starter. but not the bike wont fire up. i removed and replaced all the spark plugs and have seen it arc.
    thats basically where i am at with the bike. im checking the timing but do you have any other suggestions?
    it is a 2000 honda shadow spirit 1100vt
  9. dustinthewind
    05-08-2013 03:27 PM - permalink
    Hi ace. Question for ya in regards to the link you have me about my LED signals that are 3 wire. Do I only need to diode the indicator on the triple tree? Along with the flasher of course.
  10. chuchabrunn
    04-11-2013 12:42 PM - permalink
    Thanks to your posts, I know I have to purchase an electronic flash relay and diodes for the front signals. What do I need to convert the rear signals into running/brake/turn lights with these dual color LED lights? What kind of flasher, diodes, etc. do I need to buy to be able to connect and handle the front and rear LED turn signals, side mirrors w/LED turn signals, integrated LED tail light w/turn signals, and the electropods flashing brake lights?

    Thanks in advance for your help. So sorry for having to split this message up into 4....

  About Me

  • About Aced It
    In your garage stealing parts off your bike
  • Signature
    Visit my current '80 CB900C project
    CB Lingo for My Road,
    and my '91 VLX600 bobber build My Road to Bob,
    and my '03 ACE750 sled build My Road to Rod.

    Keep the rubber side down, unless of course you have a rubber head!


Total Posts
Visitor Messages
General Information
  • Last Activity: Today 07:06 AM
  • Join Date: 08-13-2009
  • Referrals: 0


Showing Friends 1 to 5 of 5


No results to display...


10:54 AM - Aced It quoted MikeB in post Carb Sync tool
I use ATF. The bright red ...
10:20 AM - Aced It quoted allenpa5 in post Carb Sync tool
To confirm, are you adding 2-...
07:02 PM - Aced It quoted tynker in post CB Lingo for My Road
Your new C B "handle" will ...
10:59 AM - Aced It quoted MikeB in post Carb Sync tool
I hope the gadget is more ...
10:16 AM - MikeB quoted Aced It in post Carb Sync tool
So apparently I got an Arbur...
01:17 PM - Aced It quoted owagner06 in post Got a bobbed out shadow?
Your VLX is what inspired me t...
01:14 PM - owagner06 quoted Aced It in post Got a bobbed out shadow?
Here's my '91 VLX600 and '03...
08:24 AM - Aced It quoted adlowe in post Carb Sync tool
For a V-Twin, I'd still pre...
04:25 PM - Aced It quoted Phyhowe in post HOW TO: Water Joint O-Ring Replacement VLX600
Thanks, did this to a friend...
04:20 PM - Aced It quoted SpoonMan in post Mayday!! (fork seal)
Seal mate tool. $5 Curved ...
For the best viewing experience please update your browser to Google Chrome