Honda Shadow Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Technical Discussion
    Just getting ready to buy a replacement the H4 bulb for my 2012 VT750 with a LED bulb and was concerned about flickering and non compatibility to the system. So was going to try a cheap priced bulb first but wanted to ask if anyone had a decent replacement bulb that would not if any cause...
  2. Technical Discussion
    Hey all i was looking to see if anybody has retrofitted a led headlight assembly into the stock housing on their 2006 vt1100c2? I bought one i really like but cannot seem to figure out how to mount it in place properly. Any help is appreciated. Thanks.
  3. Technical Discussion
    Hello all, So I have a 05' Honda Shadow Sabre VT1100C2 and I wanted to "modernize" the bike with a LED headlight (ZMoon in Amazon). I figured there will be some kind of universal brackets that can hold the light into place but after a ton of research, I am not seeing that option. I am not...
  4. Technical Discussion
    Im brand new here and hoping someone can help me. I am switching to LEDs on my ACE 750 one thing I wanted to do was swap out my front end to a single headlight with integrated turn signals. As well as add rear LED turn signals, brake light and running light. I purchased my headlight on Amazon...
  5. Technical Discussion
    Alright ladies and gentlemen I have been lurking around here reading up and getting tons of information and decided it was time for me to give back. This is my first post and hopefully more to come, enjoy! Honda Shadow Phantom LED headlight installation LED light that I used...
  6. General Bike Discussion
    Hey everyone, Wondering if anyone knows of a site that I would be able to find a new led or projector headlight for a '14 phantom 750? Thanks
  7. Technical Discussion
    with a little patience and hard work you can get one of the led daymaker to fit inside the stock vt1100 headlight housings as I tried and succeeded. Look here separate the outer ring from the stock headlight with minimal damage from the housing. Then grind the edges off the new headlight unit...
1-7 of 7 Results