Search Results for ‘wiring’

I've started a project on my 1997 Honda Shadow ACE which has taken many moons waiting on parts. Currently I am in the finalizing process of electrical before I put the bike back together. So far I have everything figured out except for these two ring connector wires. Which has 1 Ring connector...

Hey ya'll, I have been studying the posts and info on this great site, and seems like ya'll know a thing or two. So here is my situation. As always I have no budget/funds for "new" parts/tools. Always finding used free or traded materials. A couple of weeks ago my lil' truck went out. While...

I purchased the replacement console for my 86 shadow. My original instrument had a fuel light and a tail light light. The new one does not have the tail light light and the fuel light was moved to that part as seen in the picture below. What I want to know is where would be the easiest point to...

Has anyone done the push start and toggle switch for key ignition on a 1988 honda shadow 600? If so how did you do it? This is the harness.

Hi all I've tried reading the wiring diagrams but I cannot for the life of me find out where to get 12 volt switched power behind the headlight in the wiring block. Would appreciate any help.

I am trying to chop my 2005 VLX 600 CD, I really want to just simplify my wiring harness as much as possible and remove anything and everything that isn't absolutely required to make the bike run and ride. Also remove any extra safety features like the kickstand switch, if possible I'd love to...

So, I took on a project bike knowing basically nothing about working on a bike. It's a shadow750 frame, with a Shadow 1100 motor build. I think it's mostly all there. Missing battery, turn signals, mostly odd and end stuff. The wiring harness does not look right. Some things are capped off. Some...

I'm trying to rewire my bike to have no handlebar controls whatsoever no turn signal, no speedo, no dummy light or lights on triple tree I also want to completely remove the safety interlocks I'm running gravity fed so no fuel pump, however do I have to wire the fuel cut relay or can I chop it...

So I was fixing my engine and due to all the moving around the wire eventually snapped right at the base. Whats the best way forward? A new neutral switch set is pricey. This is an XR 125

Hey all, I hope I'm in the right place for this! I am getting an abandonned 83 Shadow VT500c back up and running. I can get it to start, a miracle, but I noticed there was some issues with the left and right handlebar switches (signals/headlight/start/killswitch) So I did what I thought was...

Hey everyone, I have a friends 1985 vt500c that has a messed up wire harness so I decided since we are going for a custom build bobber style, why don’t I chop the already destroyed wire harness and so I did, my goal was to hot wire the bike with just hot to ground and just use as minimal wiring...

Hi all My son has been gifted a 94 VT600 Bobber project. Sadly it has had a wiring fire and the previous owner has cut and shut the wiring into a nice bowl of Technicolor spaghetti. In an amazing twist of luck today we got the beast to fire and run well but many wires, particulary to the CDI...

I am looking for guidance regarding the installation of a Smart Turn System module (Smart Turn System - First turn signal cancelling device for motorcycle) on my 2003 Honda Shadow Spirit 750 (VT750D). Is there anyone that has experience installing a Smart Turn System unit on a Shadow that can...

Round end, flat, feels solid state, on a 2 wire plug that sits tucked in an OEM boot. The wires going in to the harness are maybe Black w/ Yellow & Yellow w/ Black or maybe Black w/ Brown & Brown w/ Black. No markings on the part itself at all. I can't find it on any wiring diagram but some...

I installed 4 new turn signals, led 2 wire. I purchased a blinker genie from chromeglow. I installee it as instructions state... For the time being to make sure it works, i just have the wires laid in there. The front blinks properly ( a little fast ) but if you turn on left the left blinks...

Hi guys, I've pretty much tried everything and am now turning to you guys for help. I am building this bobber and I can't seem to get power to any of the switches, headlights or the cluster lights. I already replaced the stator solenoid thinking that was the reason but no. I can jump the...

Hi just recently got a project 98 shadow 600 having trouble reading the wiring diagram if anyone knows what wires these are would be helpful !

Hello, I have looked all over and cannot find an answer. I am rewiring my 1985 shadow vt700 and cannot find contacts for the connectors behind the light cluster. They are some sort of flat blade molex or something. Does anybody know exactly what they are and if I can buy them? I would perfer not...

Guys, need some help please. I am no guru when it comes to wiring. Hate it with a passion. I’m working on my 89 shadow vt1100c. Bought it cheap to fix up and chop. She will not start, so I’m going through all of the wiring. Compression is good, carbs are cleaned, battery is good, etc. The wiring...

Hello all, I am currently trying to wire up my 89’ shadow vt1100. Whomever had this sled before me completely wired this thing with no rhyme or reason. Cut wires, unplugged wires, etc. Literally a **** show. Wiring is my WORST ENEMY, but besides that.. I cannot seem to find a wiring diagram for...