Honda Shadow Forums banner

'86 vt1100c foot pegs/shifter question

1K views 4 replies 3 participants last post by  mmcgary 
#1 ·
I'm working on rebuilding/restoring an '86 VT1100C and when I got it, the foot pegs and shifter/brake controls were all missing. Without seeing what stock looks like, it's hard for me to tell what I need to get a set of foot pegs and controls mounted up. I was wondering if somebody could point me in the right direction or possibly post some pictures. I'm going the cafe racer route with fork mounted clip-ons so I'd like to go with something somewhat aggressive or at least not floorboards. Thank you for any help.
 

Attachments

See less See more
3
#2 ·
Hello Dutin,

I studied the photo's. And understand, cafe mounts might be custom in nature.

Chiefly, the twin mount bolting design is of capacity to rather bump out to footpeg.

My aftermarket mounts are steel (about 3/8 inch,thickness) thus to s bend curve and

flat welded chrome to achieve outboard dimension required for foot and peg.. the

shift activation, general fit to toe of rider, a parallel, inboard plate with toe button,(forward),

hence with lever throw to upward spline lever.
287787
 
#3 ·
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top