Honda Shadow Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Hey everyone I have a 09 Honda shadow spirit bars are sitting I believe at 6 inches
I bought 12 inch apes and I want to see if anyone has gotten their cables from motion pro. Basically I’m looking for a cheat sheet to see what sizes someone else used.
Thanks
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #3 ·
I’ve gotten cables from motion pro and they’re pretty good. All you have to do is tell them you want “stock + X inches.” Easy way to figure it out is to put the new bars on and measure how much more you need from the stock. For my 2000 Shadow Ace 750 and 12” bars, pretty sure I needed a stock +8” clutch cable.


Sent from my iPhone using Tapatalk
Cool cool thanks i appreciate it I’ll try it out
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #6 ·
I have a '09 shadow spirit too and know the risers are something like 5-51/2 " tall and about 3" of sweep.
You could get some lower risers that would lower the apes and allow use of stock cables.
Cheap stubby HD clone raisers plus some adaptor studs might be cheaper the the caple set, and remember, you have to also extend the wires too
And to me wires that don't follow the bars out to the switch pods look like crap.
Stubby risers and apes may not be the look you are going for, it has to be the look, as apes are never comfortable.
You'll know this after you get the install all figured out/spend the money/do it and ride them.
jmo,
:unsure:
thats pretty much exactly what I did I bought 1 inch risers to replace the 5 1/2. When I tried to install everything back on the wires were for sure to short which I was going to run inside the bars anyway. But the hydraulic brake line was short along with everything else. I think may have been rushing it I’ll have to try again. Plus the way I positioned the bars were a little more forward. Lol Im mechanically inclined but still new to working on my bike. And what did you mean by adapter studs? Went right over my head.
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #7 ·
Anyone who buys ape hangers only for the looks will likely find them uncomfortable, I’ll agree on that but there is a small group who truly enjoy and find it comfortable to cruise for hours with their hands above their shoulders. 🤘🏻
Definitely agree but we’ll find out lol. I honestly want the 12 inch apes with the 5 1/2 inch risers felt very comfortable just in the moch up
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #14 ·
Yeah, I moved all of the cables to the front of the handlebar. View attachment 289717
Been busy with worth my apologies but I’ll set it up this week and give it a try thanks.
And ouuuuuu very clean bike I like it
Yeah, I moved all of the cables to the front of the handlebar. View attachment 289717
my apologies been busy with work, but I’ll definitely give it a try thanks. Very clean bike I love the halo I’ve been looking to change out my stock light as well.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top