Honda Shadow Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,129 Posts
Wait a minute, is this when you both ride together or, times when you are the passenger?
The clock is still ticking, let me get this straight, I'm going to take this group and everyone lift.
Are you are telling me for everyone to have a helmet helper light, and how many lifts have been going on?
I mean for decades of coasting, and now how many accidents have occurred on lift?

Oh, this is in your head. Ah, I get it. Someone once said there is so much chaos going in the brain as opposed to reality. I wish I said it, but the comments from the family members are about how dangerous this is and could get killed. The thoughts in their head.

Get him a bottle of windex for the mirrors instead. Who relies on a light no matter what color it is. The stupidshit you have the light for will probably plow into you anyway. Mirror-Mirror on the bike, I'm looking in you and I'm all right.
 

·
Registered
Joined
·
1,129 Posts
If you see a bad habit, for sure address it. All I see are cut wires and a band-aid to address a problem, which does not cure a bad habit.

I'd give him the WATT4 and put the light bulb in his head to tap it some.
 

·
Registered
Joined
·
1,129 Posts
The brakefree is wireless and goes on the helmet
The helmet is remote on its own, or charge the helmet piece, still have to wire up the momentum switch to the brake light I'll assume. Then that's cut the aftermarket wire plastic back, solder a bead of solder to the tip of the wire strands, Insert the wire in the back of the connector, glue it in place with a tube of E6000. Same goes for the two wires, then cover over any exposed lead or wires with the glue. No need for tape. No need years down the road the tape melts and unravels.

Pull the 3 wires out in back of the brake switch connector, it's that fast, that easy, and no wire on the OEM was cut or crimped at all.
 
1 - 3 of 3 Posts
Top