Honda Shadow Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
157 Posts
Discussion Starter · #1 ·
I recently switched up from the Aero 1100 to the VTX1300S, and have noticed a pronounced proclivity for the floorboards to drag when making a tight turn. I've yet to spark up the pavement in a high speed turn, but seem to grind away only when I pull out of a stop and make a turn simultaneously. The first couple of times were disconcerting, but now it seems almost second nature. I suppose that most X owners deal with this phenomena by buying stock in companies that produce billet floorboards and pegs. Looks like I shall have to diversify my portfolio!

Radar
 

·
Registered
Joined
·
7,345 Posts
I do this too but predominately on left hand turns from a stop and I tend to drag on left hand turns at speed also. Might be that I'm just a little faster on left hand turns.
 

·
Registered
Joined
·
540 Posts
My VTX1300 drags pegs alot quicker then the spirit,
It should help going with the mapan forwards, I think they should gain a lot. :D
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top