Honda Shadow Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
4,689 Posts
Warm it up with a hair dryer see it that will loosen it up - I assume the fork tube is stuck in the compressed state?

If the above doesn't help, remove the bolt at the bottom (up inside the axle housing) and apply some air pressure and see if you can blow it out.
Be careful, keep the pressure regulated low at first, and the tube pointed in a safe direction.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top