Honda Shadow Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
89 Posts
Discussion Starter · #1 ·
just curious if anyone has done this before: ive seen some guys install a toggle switch dorectly to the housing that powers the light on and off and controls the high beam low beam. which wires would be the most important to keep to make this work and which ones can be cut off?
 

·
Registered
Joined
·
5,978 Posts
just curious if anyone has done this before: ive seen some guys install a toggle switch dorectly to the housing that powers the light on and off and controls the high beam low beam. which wires would be the most important to keep to make this work and which ones can be cut off?
Why????? Don't you have a hi/low switch for your headlight?????
 

·
Registered
Joined
·
2,158 Posts
are you planning on loosing the left switch housing including blinkers etc? If so just run those wires up to the headlamp and cut the switches off. You'll loose your horn then too unless you don't care or come up with another switch.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top