Honda Shadow Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
I am having front axle issues on my VT800 1988. We are currently on a trip and stopped right now. I am desperate to fine a picture of the front axle at the fork area on both sides.

If you have a good, clear pictures please post them.

Thanks!!
 

·
Registered
Joined
·
11 Posts
Discussion Starter · #4 ·
Tried, its not helping much. Somehow the two nuts at the bottom end of the right side fork came loose and the bottom half moon bracket that mounts to the fork to hold the axle had slidden to the outside edge of the axle. I dont think the fork is to be out that far.... I thought it was to be in more on the axle bushing. I'll have to see someone's picture to know for sure. Wish there was a honda shop nearby.
 

·
Registered
Joined
·
11 Posts
Discussion Starter · #9 ·
I'll get that picture posted. The axle is not loose just the fork clamp at the bottom of the fork. It looks as though the fork is too far out on the axle.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top