Honda Shadow Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
have a 97 1100 ace. i just replaced jets with dyna stge 1 and kn air filt. pipes are stock with baffels out .got nice inc in performance. i followed all instructions
problem:
i'm popping at idle and coming off throttle. also i noticed the choke cable for rite side carb does not move in or out when applied. the lft side does. i've tried adjusting the idle scews. it helps some but not near enough. also how does the idle adjustment knob come into play. and i've noticed a slight mis from time to time. my plugs are tanish
i would appreciate and help and or advice
thank yhou
 

·
Registered
Joined
·
55 Posts
You have a slight lean condition from idle and mid-range throttle position.You should lower the c-clip on the needle.Lowering the clip will richen the problem area. Lower the c-clip one (1) position down.
As far as the choke cable movement you will have to correct this by disassembling the choke from the carb and cleaning up the plunger. Use a fine emery cloth to clean the plunger and carb cleaner in the plunger seat.
 
1 - 3 of 3 Posts
Top