Honda Shadow Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
423 Posts
AKM,

Those pins are used to locate the controls on the stock handlebar, they do not affect the stability of your controls in any way. (I'd guess they're there to make it easier on the assembly line to get every bike's controls located in the same position.) The bar clamps alone hold the controls where you put them. Grinding them off won't affect your controls at all and that's much easier than locating and drilling a hole in each side of your new apes! Grind away!

Brian
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top