Honda Shadow Forums banner
1 - 5 of 5 Posts

·
Registered
05 Sabre 1100
Joined
·
241 Posts
Discussion Starter · #1 ·
1100 sabre. Planning to moly my rear hub and shaft ends...whats involved in getting driveshaft out to lube splines on both ends???
 

·
Registered
1983 Honda vt750 Shadow
Joined
·
17,731 Posts
Take off the brake connections and rear wheel attachments, and slide the wheel to the right. Take off shock bolts and the bolts that hold the rear assembly. Slide that whole unit back and the driveshaft will come out of the U joint in front.
Manual is here.

 
  • Like
Reactions: Krash

·
Registered
05 Sabre 1100
Joined
·
241 Posts
Discussion Starter · #3 ·
Not having any luck accessing the manual. Are you saying the rear swing arm has to come off to get to the forward shaft splines?
 

·
Registered
1983 Honda vt750 Shadow
Joined
·
17,731 Posts

Attachments

·
Registered
05 Sabre 1100
Joined
·
241 Posts
Discussion Starter · #5 ·
Well ujoint wouldnt come out. Must have to remove swing arm andtake it out the front. Seems to be a baffle in the front of the driveshart keeping it from comming out. Was kinda hoping to inspect ujoint. Oh well, maybe next time. Everything else got a coat of moly and theres still enough to do another bike.
 
1 - 5 of 5 Posts
Top